X1-01 rm-713 no power done by hawk w/firmware inside!!!

UNIT: X1-01_rm-713


STATUS: No power

TOOLS: Twister w/hwk,UV cable v2,firmware http://www.4shared.com/file/LBqfz6-B/Nokia_X1-01_RM-713_529.html



ACTION TAKEN: Reprogram


PROCEDURE:
1.Tick check
2.Select dct4 tab
3.Select product[x1-00 po select ko not supported kc x1-01]
4.Put mcu,ppm,& cnt
5.Tick write flash
6.wait till done....


Screenshoots:


LOGS:

[code]If used non Auto-Ignition cable, press Power-On button
IF_SBL: XGOLD110, Ok
IF_EBL: Default_RAM_Bootloader.10.24, Mode: CC
BAUD_R: 921600
FL_ID : EC000424, Samsung Unknown 128Mb
MCU FLASH BUNDLE: rm713_005.290
Flash File: hw_b1_rm713_r05.290.fls
Erase Area: 0x00000000 - 0x0001FFFE, Erased: 00:01
Write Area: 0x00000000 - 0x00005FFE, Written: 00:00
Erase Area: 0x00800000 - 0x00BFFFFE, Erased: 00:40
Write Area: 0x00800000 - 0x00BEFFFE, Written: 01:06
Erase Area: 0x00C5D000 - 0x00E5FFFE, Erased: 00:18
Write Area: 0x00C5D000 - 0x00DFB6FE, Written: 00:27
PPM FLASH BUNDLE: rm713_005.29ij
Flash File: hw_b1_rm713_005.29ij.fls
Erase Area: 0x00100000 - 0x007FFFFE, Erased: 01:11
Write Area: 0x00100000 - 0x005C6F7E, Written: 01:20
CNT FLASH BUNDLE: rm7130_nai05.29ij
Flash File: hw_b1_rm7130_nai05.29ij.fls
Erase Area: 0x00E60000 - 0x00F5FFFE, Erased: 00:10
Write Area: 0x00E60000 - 0x00F1057E, Written: 00:11
Flashing Done: 05:40
ShutDown Done


My finish product:



For reference lang po,sana makatulong!!!

Ang Gnda Ng Thread Pagkakagawa At May Firmware Pa Kaya Di Na Mhirap DL Sa Iba,.....Congrats Pre,.............

GsmFounder wrote:Ang Gnda Ng Thread Pagkakagawa At May Firmware Pa Kaya Di Na Mhirap DL Sa Iba,.....Congrats Pre,.............

Salamat sa pagbisita pre...